CNCzone Network: CNCzone  ::  3Dprintforums  ::  RFQwork  


Results 1 to 1 of 1

Thread: Airco Heliwelder V S/N MH 810008

  1. #1
    Join Date
    Feb 2012
    Location
    Washington State
    Posts
    1

    Default Airco Heliwelder V S/N MH 810008

    Our university has several Airco Heliwelder V's, stock s/n MH 810008, stock number 1341 0300. I have a manual dated April 1986. I have partially reverse engineered the board but my reverse engineered schematic does not match the schematic that is in the manual. I am looking for a correct manual and more specifically the complete schematic for this machine. This schematic should also show the schematics for the control board. The interface board number is: 1373 5260 Rev 3

    Thanks for any help.

    James Shephard


    My e-mail is james.shephard@wwu.edu
    Last edited by james6262; 02-15-2012 at 02:39 PM. Reason: To include E-Mail

Similar Threads

  1. Replies: 16
    Last Post: 03-31-2014, 01:26 PM
  2. Airco 160 Dipstick?
    By Roughneck in forum MIG, TIG, Stick, And Oxy/Fuel Welding
    Replies: 1
    Last Post: 02-24-2011, 11:41 PM
  3. Airco Dip/Stick 160?
    By JohnyWard in forum Other Manufacturers
    Replies: 0
    Last Post: 09-21-2010, 11:07 AM
  4. Got a good deal on a AIRCO Heliwelder 250 ... should I pull the trigger
    By photo_wu in forum MIG, TIG, Stick, And Oxy/Fuel Welding
    Replies: 1
    Last Post: 04-12-2009, 01:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •